Introduction To Bookbinding - Week One

 

When I first created this blog I was very interested in papercrafts and bookbinding in particular.  I still am interested in both these things, its just I've found out about lots more crafts since then and so maybe I have a little less focus than I used to.

 

Anyway, this year I have a couple of bookbinding projects that I would like to create and so I thought it might be a good idea to have a refresher, seeing as I haven't really done any bookbinding for the last couple of years.

 

I've been following @yvettejah for ages and love her projects so when I found out she runs an online introduction to bookbinding, I signed up.  

 

I've just completed week one, although it actually took me two weeks to complete. 

 

I like that we started by just looking at how we can fold books out of paper, no need to sew.  It was fun to fold the projects and see how they would come out.  Already I'm full of ideas of how I could use them.

Ori Folder

 

Once we'd played with folding, we created an Ori Folder and a Blizzard Book.  I love both very much and again I already have ideas about how I could use them in the future.

With week one complete I'm looking forward to seeing what week two holds.  I've already learnt five new ways to make books, and I've got a feeling it's not going to stop there.

Blizzard Book

Gelli Plate Printing

 For Christmas I asked for and received a gelli printing plate.  I'd seen people playing with them on Instagram and wanted to have a go.

It is sooooo much fun, and really quick.  Pro: you can set up a print in minutes; Con: you only get one print each time.

So far I've just been playing to see what works.  Printing leaves had worked quite well, but works best when they are flat.  Printing textures is interesting - loving the bubble wrap print.

 

I've also tried printing with wax rubbings which worked quite nicely too.

I'm loving how you can layer things and mix colours etc.  So many possibilities.

I've also tried to take images from photos in magazines, but that didn't work for me.  Several reasons this could be, so I need to try that a bit more.

I think the thing I need to do before I try any more is to buy some new paint.  All the paint I have is from when I was at college, which is something like 20 years ago.  I'm surprised how well its done to be honest, but I guess paint without lumps in and that isn't seperating would probably work better.

'im outdoors has said he'll take the old paint when I get round to replacing it, so at least it won't go to waste. 

Itsy Bitsy Christmas Bear Hug

 In September I wrote a post about a tiny felt bear that I made.

Having made one, I had no real desire to make another, however I did have an idea of how to amend the pattern to create some Christmas presents for people.

 

I started by creating some tiny yellow stars, then some shiny silver wings, before creating the bear.  Wings and faces were added first, then the bear was sewn up, remembering to add a ribben for hanging as I went, before stuffing and adding the stars.

 

Again, I made full use of train commute to the office.  There is something very satisfing to get off the train knowing you've made full use of the time.

A very simple gift, but something I hope will be added to the tree decorations of the future.

Christmas Cards 2022

 

Happy Christmas everyone!

Here is this years printed card design.  I wanted to see how detailed I could make it using lino and I'm pretty happy with how this turned out.

 

I found some pretty red card this year that looks pretty Christmasy, but I like the recycled brown card too.

 

And I've already got some ideas for next years design! 

Here's to the New Year and new adventures.

Portland Cardigan

 

I loved the chunky look of this cardigan when I saw it and wanted to have a go.  I think this is the most chunky thing I've knitted yet and it was amazing how quickly it came together.

I was a little disappointed that it's knitted flat and sewn together, but it's not the end of the world, and I guess if you made it as one piece it would get pretty heavy very quickly.

I used 5 balls of Stylecraft Special XL super chunky in duck egg, and my biggest needles.  And rather than taking months it took weeks!

 

I love the fisherman rib stitch.  I was worried it would slow me down, but it's really easy and looks fantastic.  I love how chunky the whole thing is.

If I was doing it again I'd make sure I was even more loose when binding off the top of the sleeves, and I might be tempted to make the front panels a little wider, but otherwise I think its come out pretty well.  Not sure if I can wear it to the office though - it might be too chuncky to fit under my coat!

Upholstering A Stool

 

When 'im outdoors was looking for an upholster earlier in the year, we found one nearby and I couldn't help but notice she was also running courses, one of which caught my eye - a one day workshop on how to upholster a stool.

So this weekend I visited The Upholstery Yard to see what I could learn.

 

We started off with a basic Ikea wooden stool.  We would learn how to add padding (not foam) and then cover it - how hard could it be!  

 

First we attached hessian to the top of the stool.  With the hessian in place we used a massive scary mattrice needle to add loops to the hessian.  Into each loop we hooked coir until we couldn't see the wooden stool top or hessian and we had a big hairy mass.  

 

Once we'd worked all the lumps out we covered it with a wool and cotton wadding.  This had to be long enough to cover the coir all the way round without being so long it tucked under the wooden stool top.

 

At this point we stopped for lunch and Georgina showed us some of the things she'd made in the past and some of the projects her long term students are working on.  There was some very impressive work.

After lunch we started on the next part of the process.  Over the top of the wadding we placed a sheet of calico.  This was then wrapped round and tacked to the bottom of the wooden stool top.  We had to do this several times to get the tension we needed to keep everything in place.

 

With the calico stapled in place we then had to form the corners.  This was the hardest part of the whole workshop.  But it was worth the time to get it right.  And suddenly I had something that looked like a pillow!

 

On top of the calico we placed a sheet of wool felt, which is a natural fire retardent.  We stapled this in place too, then used glue on the corners so it didn't get too bulky.

 

Finally it was time for our fancy material.  I hadn't bought any with me, so chose some from Georgina's stash - a pretty green tweed.  We did much the same we'd done with the calico here but being more careful with our corners as they would actually be on show!

 

With everything in place and the excess material cut away we put a piece of black bottom material over everything to give a neat finish, before screwing the wooden stool top to the wooden legs.

 

Suddenly I had a finished stool.  It was very satisfing to sit on it!

I am so pleased with how it turned out.  I love the material and I'm really pleased with the finish.  Looking at it now its hard to believe I did that.  And I've got a pretty good idea what I want to do with it too.  More on that later.

It was a great workshop with two other ladies and I learnt a lot.  My only complaint was that I ended up with very cold feet as we were in an old barn with a concrete floor.  I need warmer shoes!  Anyway it was a great use of a Saturday.

Another Small Wooden Box

 After the success of the last wooden box I asked if 'im outdoors could make me another one.  This time as a gift for my mum.  I know she likes a wooden box, she has a small collection and I thought she'd like one in this style.

 

Once again we had a chat about size, style and finish then I left him to it.  And again he presented me with a finished box which just needed to be lined.

 

This time I used a bright purple felt (again from my stash) - her favourite colour!

This time instead of filling the lid with foam, I lined it like the box, which I think looks great.  I'm very pleased with the box, I just hope she is too. (she did like it and was already planning what to store in it)

 

NNAS Silver Navigator Award with Pied A Terre Adventures

 

Last year I did my NNAS Bronze Navigator Award to help me become more confident running the trails near home.  I really enjoyed the two days and have spent the last year putting into practice some of what I've learnt as I've starting running the Slow Ways and other trails round the village.

The aim was to run the Shipwrights Way, and although I didn't manage it this year, its still on the list for next year. 

So while I've been using the trails and enjoying a new freedom, I knew there was still more to learn and so I signed up for the NNAS Silver Navigator Award. 

Being November I knew the weather might not be that kind, but I hadn't expected the driving rain and stong winds we ended up walking the South Downs in. We did have a moment of sunshine, but our waterproofs really earned their keep this weekend.

 

We were a group of 5, all of which had either done the bronze award or were confident navigators, but all wanting to learn more.  It could have been a miserable weekend, but everyone was out to learn and have some fun, so even in the pouring rain we had a good time.

On the Saturday we were at Devil's Dyke to really understand contours - the orange lines you see all over the OS maps which show how lumpy the land is.  It's all very well 'understanding' them, but you need to understand what that means for the route you've picked out.  For instance at Devil's Dyke, I wouldn't suggest trying to go straight up the side of the valley!

 

We then started to work with our compass.  The rain and wind made this interesting as the compass slid around on the map as you tried to line things up and made my fingers so cold I could hardly turn the dial, but by the end of the day I could take a bearing and then follow it across open country.

As the mist came down and the sky darkened, I was quite glad to get in my car, turn the heater up and go home to hot food.  

Waking up on Sunday to the sound of more heavy rain, made getting up and out harder than it should have been.  But most of my kit had dried out and as 'im outdoors said, 'it'll be done by the time you get there'.  (it wasn't.)

I wasn't sure I was going to get to Stanmer Park, the location for day two.  There were some very big puddles on the drive over and the rain was still coming down.

Sunday was all about putting into practice what we learnt on Saturday.

Our first task wasn't as easy as I'd hoped due to the many footpaths on the ground that weren't shown on the map.  But each leg after that was better and better and the sun even came out for one of them.

 

There was something magical about setting up a bearing on my map, then setting out across a field with no view of my destination, but to find it every time. 

And Rich, our instructor, when not showing us how to navigate was full of advice and interesting facts to fill our heads leaving no room to think about everyday things, which was also lovely.

By the end of two very wet days my gear had been tested to the max, so I was pretty pleased to find that most of it did fine (even the cheap Peter Storm waterproof trousers bought 20 years ago!).  I now know that if I want things to stay dry in my bag I could do with some dry sacks, and if it's going to be cold and wet I really need to invest in some better gloves - I got through 2 pairs over the weekend and both were soaking wet by the end of each day.

I know a lot of people would think this sounds like a rubbish way to spend a weekend - out in the cold and wet, but I really did have a fab time.  Expect for my hands, I was warm(ish) and dry, and I learnt a bunch of new skills which I can really see feeding into my trail running, giving me even more freedom and confidence.  

I'm really looking forward to going out and trying it again on my own, but I might let the rain stop first.